Stainless Bosses
- Details
- Hits: 1934
Stainless Steel 'Sensor Boss'
| Lambda Boss M18 x 1.5mm | Boss M12 x 1.25mm | Boss M14 x 1.5mm |
 |
 |
 |
 |
 |
 |
| Part No. = SSLAMBDABOSS | Part No. = SSBOSS1 | Part No. = SSBOSS2 |
|
Lambda Boss M18 x 1.5mm pitch with reduced outer diameter to aid location before weld |
Sensor Boss M12 x 1.25mm pitch with thread down to 15mm deep of overall depth 20mm |
Sensor Boss M14 x 1.5mm pitch Overall length is 16mm |
 |
 |
| Part Number: SSLAMBDABOSS45M18 | Part Number: SSLAMBDABUNGM18 |
| Stainless Steel Angled at 45 degrees Lambda Boss with M18 thread for easier access on some exhaust systems. | Stainless Steel seal bung for Lambda Boss hole M18 threaded |
|
Boss M16 x 1.5mm |
Long Boss M16 x 1.5mm | Boss M18 x 1.5mm |
 |
 |
 |
 |
 |
 |
| Part No. = SSBOSS3 | Part No. = SSBOSS4 | Part No = SSBOSS5 |
|
Sensor Boss M16 x 1.5mm to depth of 15mm with 9mm through hole |
Sensor Boss M16 x 1.5mm pitch to 22mm deep with 5.5mm through hole |
Sensor Boss M18 x 1.5mm pitch with 12mm through hole and 3mm deep flange |
 |
 |
| Part No. = SSNOXBOSS-M20 | |
|
NOX Boss M20 x 1.5mm pitch thread with reduced outer diameter to aid location before weld and lip to prevent over insertion of sensor. |
|
 |
 |
| Part No. = SSNOXBOSS-M22 | |
|
NOX Boss M22 x 1.5mm pitch thread with reduced outer diameter to aid location before weld and lip to prevent over insertion of sensor. |
|
| Boss M16 x 1.5mm | Boss M12 x 1.5mm |
 |
 |
 |
 |
| Part No. = SSBOSS6 | Part No. = SSBOSS7 |
|
Sensor Boss M16 x 1.5mm to depth of 13mm with 9mm through hole |
Sensor Boss M12 x 1.5mm pitch straight through full 20mm depth
|